@Gabriel Fockler so do I. I'm 6'4" and never street skated so I'm not very comfortable on a normal street deck, especially for sliding. On this I don't even have to shorten my freeride stance at al...

- Based Boards "Ennviious" - 21 inch wheelbase, around 9 inches wide Stock 124mm zealous Yellow kevos Skatetech goofy torque block   - Prism Theory  Sym 43° 165mm Paris V3 with ...

Wb from axle to axle Zenit Mini Egg 9.75×31" 8ply & carbon Wb 22,5 Otang Kegel Bear Gen6 155mm Front 50° 93/95 Rear 30° 97/97   Zenit Draft 9.75×35.75" 8ply &...

🔮

Deck: Non-existent brand, shape mostly similar to mini hades with a five mile-like drop in the rear part (like on the phoenix but not that extreme) Trucks: Valkyrie 115-125 Slalom V3 45/15, Tall A...

I really like the slightly longer wb on this deck. 

@Sk8bored  https://youtube.com/shorts/KzuR6CHUEjE?si=v60wytoZXOHF_KDw 

I mean if it makes sense, bump the rider in front of you foward, or clap pucks. Yelling doesn't make sense imo 

An aero kit on a freeride board, why? If you really wanna maximize performance then take off the weight and put on some grippy wheels first.

@Gabriel Fockler Yeah, I really loved the drops of the previous version but wasn't really a fan of the shape. It had too much taper, especially in the back and I usually don't mind taper. Then the...

Powell Peralta Slidewinder 159 Indys with Bones hardcore bushings (not pictured) Powell Dragons/G-slides or Remember Pee Wees I only got to skate this setup once because of the weather but I l...

Chroma Polaris with lokton Chopped k5 155-165 46/20 (dewedge) 84/84 krank barrels front, 87/87 krank chubby/barrel rear Free wheel co dumbs that are now footstops haha

Also link isn't linking for me, not sure what the ideas are 

I mean, the longboard thing is mainly a transportation thing for most people, and there's new popularized forms of transportation that probably make it a lot less appealing to the average guy going...

@ Santa Fe  I DH & Freeride  originally from Boulder, CO 

@Gabriel Fockler I've seen it being done with a spherical deburring tool (like the one below) and a drill or a rotary handtool (like a Dremel)

@bhr that makes sense, but how do people cut out that part of the bushing? Seems a bit janky to diy it. 

You want the recessed bushing for your Zm1s. Inner part of the spherical will protrude without the dish limiting your range of motion and ease of turning. A lot of the top racers on Zm1s are addin...

 I'm currently riding the don't trip mollys V2's with spherical in front and I really like them, but I have this itch that I can't scratch off my brain. The stock bushings come with a spherica...

Certified chad setup

I'm in love with the foot stopper, where did you get it from?

@Gabriel Fockler spitting facts right there

Hallo, ik ben Barry. Ik zou ldp willen doen maar mijn portefeuille is er te dun voor, dus voorlopig skate ik op een Nickel Pennyboard, met wedges om te pumpen, op de dagen dat het lukt. Downhillen...

@Gabriel Fockler true. I agree 100% with what you say. I rode a owen fox a while back and disliked how flat it was. I  understand why everyone puts a torque block, huge footstop, screws, etc. ...

Maybe you can post a written summary of your points here? Hard to watch a 20 minute unstructured blog video.