@Nathan Godwin unfortunately those are cal3s chopped, not narrow ronins. The small ronins are on my dedicated DH setup
@Nathan Godwin unfortunately those are cal3s chopped, not narrow ronins. The small ronins are on my dedicated DH setup
@Gabriel Fockler I'm a huge fan of the flare under the toe on my front foot (check the shoe marks) so it is a fun little board! I must admit, I only got the ronins as a recent acquisition a...
First: Built this to be a fun weighted setup that's less "serious" than my downhill board. So far I've done garages on it & taken it out on a cruise for small standups/180s. It feels pre...
Huge shout-out to Aiden Haas ( somewhere on this board, I know it ) for hosting a dope little season closing event. https://youtu.be/1fMOKNB0V8Y?si=5ZXCuFd89vE_Indr
After careful research I've managed to locate the reference pinup art used to make all the Sector 9 Downhill Division pinup girl decks. I've overlaid the original art over the deck and provide...
@Ryan Murata it's you right here
this man made me buy ronins ( i stood on his board like twice )
Rocket Excalibur - 115-125 Ronins - 45 degree front truck, HPF red barrels - 25 degree rear truck, HPF glow barrels - I could really use suggestions on the bushing setup as I don't...
Currently prepping to test making an insert bushing for indys. Will let yall know if it works.
Another note on directional: I also use a short barrel roadside on my rear kingpin only. Might be worth a try!
As you're trying directional freeride (split angles, split duros) I would give running a insert bushing in the back and a spherical up front a try. It's what I personally use & enjoy
There's really 3 different types of heelside colemans we are looking at here and I think it's very important to distinguish the different inputs going into the board 1. Predrift ...
What krank duros do you recommend? @Jon LaPlant Thinking 1 set for freeride and maybe one for ldp. As to shapes, what do you recommend?
@Vašek Custom printed block designed specifically for the excalibur - I like the cutout for the toe and heel on my previous board.
@Niall Rawn I definitely think getting on good gear early is both under emphasized. I started in 2020 on shittily wedged 180mm cal2 trucks. I then moved to LA and skated in the gel lab scene and ev...
Nice DTs! Are you running any sphericals?
Fellas, first real mini setup Am I gonna die?
This tutorial assumes you can coleman to shutdown and coleman and hook back up to going straight. What is a predrift? A predrift is when you ease into a slide to shave off speed before corn...
Long story short, I've purchased a Loaded x Pantheon carbon trip and I don't know what bushings to put on there to improve my pumping efficiency. I normally skate red venom HPF, but I feel like as...
My current shoes - jordans & blazers
My rocket Excalibur is in the mail, will update when it arrives
Video of me on the board: https://youtube.com/shorts/Jt3Kp5_FfqY
@Rat Bürger hold up i mixed up RS and BS it's cupped RS flat BS