@Gabriel Fockler My ass is broke.
@Gabriel Fockler My ass is broke.
@Camilo Palacio Answers my question, thx
@Matt Needs Wheels the zealous are rad although it's the only little truck I've ridden. I mostly ride in the 40s but have taken them into the 60s with no problem. Also have not had issues with free...
New bearings could help, but zealous are fine. Are you making sure that the bearing is seated properly and that you've tightened them down really hard? I crank the axle nuts down as hard as possibl...
@Matt Needs Wheels just buy the zealous already
That subsonic 💪💪💪💪🤝🤝🤝🤝
This here quiver is made up of some long time dream pieces. Some lucky bst strikes and the most loved and well skated gear around, ever. Demonseed 43.5 with stock grip, k3s 46/46s 93/88a har...
@Matt Needs Wheels sorry, I'm not sure if I understood this correctly "The lack of deep turn could be good for locking out standups" but basically lack of deep turn helps you out to do longer stan...
@Matt Needs Wheels right now I ride decently grippy pave, mostly skate decently slippery wheels. 88 vipers yellow, Rayne envy v2, yellow krimes, 78a primo pasters. Definitely get the most chatter o...
@Matt Needs Wheels could do with less lean. The trucks of the past that inspired Zealous and Gold Rogues weren't using talls. Zm1s also switched to regular height.
banger post
After careful research I've managed to locate the reference pinup art used to make all the Sector 9 Downhill Division pinup girl decks. I've overlaid the original art over the deck and provide...
@Camilo Palacio This agrees with what ive heard. The lack of deep turn could be good for locking out standups? I do glove downs primarily, and don't take race lines. Think I'll like these more?
@Matt Needs Wheels I have old version from zealous, which is 111mm - 124mm. They are pretty stable at high speed, but one thing I don't like is that they don't have a deeper turn, which rogues have...
@Camilo Palacio Yo how would you compare the rouges to the zelous, I go sub 40mph and am thinking of switching from rouge to zelous.
@Alex Guerra yeah placing feet on the bullet feels more comfortable than Rayne since bullet concave is flatter, but Rayne is still a blast
@Kurt Derow Don't know dude Im having a blast every time with this board . It's alright if you don't like the tiny boards with weights
@F Llabata With the cork I feel standies are even easier to initiate and hold than without it. Regarding the proximity to the front truck I've haven't had any issues actually. Have never ended doin...
@Sun they're alright , kinda feel looking towards the scythe weight currently
@Jefe WW thanks !Im using the shortest atm which is at 19"
@bhr Semi- off topic, if you buy slaloms why would you want regular height? You may just be on the wrong trucks for what youre doin
@Logan Neikirk Its the wheel/pave most likely is my guess, what are you riding? Some wheels suck for chattering, and they will honk too if its the wheels, I remember that being more of a issue with...
Sounds awesome! I wish you the best on your project, I'm sure it will turn out great. Any particular reasons why you would want to make your own board or just felt like so?
