Wheelbase is the length from closser to center of the deck, truck bolt to other truck's closer to center bolt. Width is the length from rail to rail. Flex is how stiff a deck is. Shape describes...

On toesides, when you are learning, you should grab the rail to ensure proper form. Your hand on your heelside of your body should grab the heelside rail. For general positioning it should be abou...

@Sam Diefenbacher Agreed, did sooooo much digging through it to look for remembering what I hated and loved about it on there. Which took forever. When there is more site content/traffic on here i...

@Gabriel Fockler O Yeah brothür. She is made for some big low angle slides

@Matt Needs Wheels You may have to load different snapshots to get to exactly the right post/link to load but I've looked up old form posts on there with success. It can be tedious for sure.

This is why Bear should've made that 30 degree plate 

@Sam Diefenbacher I feel that "most" is a little inacurate, at least when I was looking around. Lots of clicking around lead me to dead ends.

@F Llabata Yeah it could be that too, that has also crossed my mind. Aaron Hampshire said something similiar after he rolled around on it, lowering the front angle. I've been reluctant to try that ...

@Matt Needs Wheels you could try it and find out🤷‍♂️. I rode that setup exclusively on some decent runs out east and had no issues, but I'm also a freerider before a racer. If you're trying to ...

Also btw you can still browse most of silverfish on wayback machine: https://web.archive.org/Obviously, you can only read and not post anymore but if you need to make more backups there you go!Here...

@Eric Sparrow Any discussion that still would be relivent to todays age would be huge and I could get on right away, but pretty much anything at all that I could take on I will (though it'd likely ...

@RatBürger Got shoegoo? 🙃 These are falling apart lol send help  

@Niall Rawn I see, very interesting take. Congratulations for trying to build a setup that suits your needs and your ergonomics instead of settling for what is on the market, let's see where it bri...

This looks sick for hitting some big slides 

124mm wheels??

Maybe shave it down to 9.25 wide and put the new zealous trucks on, that would be a sweet freeride/downhill build.    Looks pretty fun as is for carving!

@F Llabata yeah I'm a small person, and my tuck is fairly compact as well so that just adds to it. I went to Maryhill for the first time last year on the Micro and got a lot of comments on my torqu...

Thanks a lot!!

21.5wb Chargers 85a bushings 5° wedge front Bigzigs. Carving and pumptrack use.

@Matt Needs Wheels Allow me to counter your offer - is there anything specific that you want?  I've got a decent chunk of everything I saved posted to my blog, and I've got a bunch of stuff ar...

Low deg wedge on that rear. Bear the gn.6 40°/40°

Why such minimal angle split on the Bears? Also, junkyard handmade weight for the win.