cool innovating; I would have concern when in use that the jbweld/epoxy might eventually crumble from tensile stress? 

@F Llabata Pats risers have em for most trucks (insert bushings) poured is theoretically better tho for consistency.

@John Hower thanks for the feedback man! Drop a review on the Robots some day on the forum, I think they are pretty good trucks and people is sleeping on them!

@John Hower A bit underwhelming... Just the good old regular savant with different hangers widths, the only adjustable being the 125-135 hanger (using spacers) and a single 50º baseplate option.......

I just ordered these. They're 20% off on the Paris site right now. Also, the coupon code WELCOME15 gets you another 15% off. My set came out to $122.40 with it. 

@F Llabata I have the Dane Hannah pros; the main difference is that they have spherical pivots VS the Robot Oblivions urethane pivot cups. This makes them ride rougher, but It's a pretty minimal di...

@John Hower Thank you! On that, how do the robot oblivion compare to the DTs? 🧐🧐

@F Llabata I'm glad I could help! On my Robot Oblivions the cutout makes a big difference. They'd be almost unrideable without it. That's because the space for the spherical is just a hole in the h...

Added another board. Moose drop-down 10x 39 Put the 10" Paris v2 and 75x50mm wheels on it

An entire top notch downhill setup with three (3) set of top tier wheels and a whole bag of bushings to play with.

@John Hower thanks man, I had given up all hope of anyone ever replying to this post again. I guess if you do this mod you will know the difference between doing the recess and not doing it, what a...

I've bought probably 10 vehicles in my life less than 1600. And all my guns were less than 1600 a piece.  

Pack them with automotive wheel bearing grease. I was always an oil guy until I tried Absolutely silent bearings. That = happy bearings 

My longest push is around 26 miles. That was probably 10 yrs ago. At 25 I'm 35 now Just getting back into it. Did around 20mile today, with my boy riding his bike, I'm sore but I wanna break the...

Good dirty girls

Indiana about 25 mile north of Indy Mostly long distance push, some very mild downhill  Not on social media

Switched to automotive wheel bearing grease. 9$ bullseye abec 9s absolutely silent. Pretty sure grease in any bearing is better than oil in high end bearings

@Samuel Sparkowich Hey man! Can you make a roman candle tutorial? I can occationally get a decent one, but lack consistency on different pavement types and corner angles.  Current set up is t...

With the new Savants out thought It'd be appropriate to share this little project I did last week. I molded epoxy putty around a Paris pivot cup in my Randal 35* plate. Now I have a perfectly align...

Here's one I did yesterday.

@F Llabata Can confirm that these spherical burrs work great. OP, You want the one with a 5/8 inch ball diameter. The part number is sd-6. They're about $15 on Amazon.    I've learned...

@Gabriel Fockler mostly I'm a pusher Live in flat ass Indiana, mostly for exercise and speed matching my 8 yr old on his bicycle. There's a couple small hills to bomb

Not really hill worthy but looks perfectly fine for just riding around. This is for cruising? 

this is not unlike a 00's Longboard museum.