Hi everyone,   Looking for dancing/freestyle truck recommendations. Previously was on rf1s and have owned other aeras as well that I loved for dancing because of how light they were. Current...

Hi everyone. Getting back into longboarding, wanting to get a dancer eventually and im thinking through a setup. I like smaller dancers around 38 inches long. Prefer trucks around 165mm.  Pre...

@Jefe W I'm fine with 25wb, but pairing it with only 9 inches width is the strange part to me. A long wb board with narrow trucks? Doesn't make sense. 

Cullera, Valencia: 28, 29 y 30 de marzo https://www.instagram.com/hortadownhill?igsh=bzJkcWcxamJvOXVk Velefique, Almería: Septiembre https://www.instagram.com/packrun_dh?igsh=...

@Brosama Bin Laden   Allright, i'm a little lost on gear, the main problem is that although i keep looking, no ones skates downhill near me, there aren't shops or anyhting. So i have to exper...

@Paris MD  meh you don't need a short wheelbase if your still learning. Skate what you got and dial it up based on the feedback of how it feels. I get it though it says your in Spain. The fir...

HI, thanks a lot for clarifying. I have the Theory v2 and Calibers 10' 44º raked. I've been going harder on the bushings, now using tall barrel 93a board and plug barrel 93a roadside.Im 1,80m...

@Paris MD  - You can mix them. For downhill and freeride the modern mindset is to stand over your truck. So it'd be more ideal to have the front shortest and the rear further. If your board h...

Hi! I've been riding for a year now, all on my own. I could only learn from YT so i have a few questions that may be obvious for you. -If a board has two WB, 24 and 26 for example, you can only c...

 update : I put these on for some of the steeper runs in Puerto Rico last month; they were awesome , bringing about 15% more grip over 75a ssf . naturally , harder duro meant that on grippier...

tarnation boarding

I know how well flight construction is and got stoked about the updated mini Byron 'til I realized it's got a rider min height of about 6' tall for its ,what , 25" wheelbase? ...unless maybe you'r...

@Sk8bored trucks on that white beesh = sicksick ; sym or split?

@Sk8bored    nice setups if u can't tell,I'm into minimal concave but  as my legs get aged I'm finding that moderate concave  is not a bad thing at all .  I mention b...

I've got three marbles haha Left: mini marble sk  Middle: chopped marble 38, 9" at bolts and 35" long Right: tapered marble 38

Pushhhh

Current setup:Trucks:130-140mm spaceable chopped Indy Stage 9's on forged bp's with 2.25" kingpins (same angle as before: front +6 degrees & rear -15 degrees).Bushings:Front: Boardside: cupped ...

Finally stopped procrastinating and made a torque block (out of a 2-layer stack of cutting board). Was a real pain in the butt to cut with a hacksaw, but the end product works pretty great! Locks m...

@Matt Needs Wheels LMFAO 

ricer

@Nathan Godwin unfortunately those are cal3s chopped, not narrow ronins. The small ronins are on my dedicated DH setup

I feel like cored wheel footstop and a weight are a thematic mismatch. Pretty cool otherwise!

@Brian Lugbill If you don't know. That's what the weight ballast is for.

This thing has to have the worst side profile of all time. I'm sure it rides fine if you have a tiny stance, but i don't like how it rides either.  Wheel footstop is core.  What do you ...