@Kelsey Slides this goes unbelievably hard
@Kelsey Slides this goes unbelievably hard
Trucks are a bit of a mismatch from what I would expect to see, but perfectly serviceable. Would be better on some zealous or whatever dh truck.
@bhr I gripped a landyachtz blaze and also apply it to a torque block
What deck did you try this on? Wondering how this works with complex concaves.
@Brian Lugbill Actually slides pretty good, ngl.
Yah this is weird in a bad way. Poor dynamics to slide with and poor utility in general
Owen Fox Zia Trucks 170mm 44* (Hopefully not too) Rusted Bearings Defcon Speedvents/S9 Race Forms/Whatever wheels
@Michael Adams nose guard riser. Already cracked the nose few years ago.
What's the story on the risers? 👀
I ride this on leg killer runs. Non technical mountain passes longer than 5 miles. This thing is a couch it's so stable I hardly feel like I worked to get down the hill. Feels okay sliding as much ...
@Nick Amarit i use to think thats not how any of that works but then i saw you skate that assemblage 🤯
@F Llabata i use to have a little bell i wore for 'alerting'( annoying my crew) on my slideglove strap 2 or 3 yrs ago; it got rubbed-off on a ballin' Pro-pendy thrown on a hairpin along GRC 😅
https://youtu.be/EWwv6ktlhV4?si=1tyxHalQKf5ooA4JDo you ever need new grip and you don't want to pay for shipping or wait? We'll do I have a solution for you, 36 grit belt sander paper made by Diabl...
@bhr had it for about a year now. Trucks and deck. Does have the urethane construction. Super durable. Stopped runaway boards, lost it into curbs, and off cliffs. Still rock solid despite the damag...
K2 Aero box goes kinda hard NGL 🔥
How do you like the urethane construction and how long have you owned this setup?
Details for of my current DH setup. One year of dialing it in - happy board co thunder Lorenzo asym with angled tail. CF top and bottom. - Duct tape short torque block with ...
@Michael Adams hmm I dunno man... the rogues are just so turny and have a very large articulation in lean from center to edge, I feel that with standards it's going to feel either A. Very floppy, o...
@Michael Adams good point, but the takeover would be great for 180's. It's not got any taper so the feet should feel comfy. On my ethos switch sliding is alright but not to confidence inspiring, so...
@Kurt Derow false! The traditional RKP rogues may feel worse but the slalom geometry benefits greatly from standard bushings when you are looking for more responsiveness - hence why Zak shi...
@Gabriel Fockler I love split width! It complements the split degree angles well. i don't run split widths on my symmetrical setups tho
@Kurt Derow BUT WHAT ABOUT 180S
@Kurt Derow I'm super happy with this bushing setup for now! I played with non-standard barrel shapes and have found that using a freeride bushing kinda limits the lean for me in a ...
