Posts made by bastiweber1987666

• I think it 'swurlt

  I had the same issue with my red krimes they were fine at first but started to oval after a while. I would definitely ride em until they are unrideable. 

  posted in Wheels

  b

  bastiweber1987666
  2/15/25, 12:35 AM
• Reshaping wheels

  Turned out good. I just used a grinder to cut 5mm of each side. They work great now, a big fat freeride wheel 😁

  posted in Wheels

  b

  bastiweber1987666
  1/21/25, 12:04 AM
• Reshaping wheels

  posted in Wheels

  b

  bastiweber1987666
  1/21/25, 12:02 AM
• Reshaping wheels

  Thanks mate, I'll probably just give it a go with a grinder and a sanding disc. I have gotten some flat spots out using that method.  

  posted in Wheels

  b

  bastiweber1987666
  1/20/25, 9:10 PM
• Reshaping wheels

  Hey, I recently got my hands on some second hand 88 wheel co mavericks. They feel pretty good but I want a bit less slowdown power and longer slides. I'm thinking of cutting 5mm off and see how th...

  posted in Wheels

  b

  bastiweber1987666
  1/20/25, 12:27 AM
• (Roast) You left your board at home, which are you picking out of my trunk?

  I would go for the shangang, I really wanna try those reapers. 

  posted in Share Your Setup / Roast Other Setups

  b

  bastiweber1987666
  1/18/25, 6:01 AM
• V1 Zealous Trucks, What size and WB of deck should I be looking at?

  I ride mine at a 18.5 wb on an 8.5 inch deck with a size 10 shoe. The small meet grinder should be fine. 

  posted in Decks

  b

  bastiweber1987666
  12/26/24, 7:19 AM
• Gold Slalom Modding

  Nice one, looks like a fund set up. What sphericals did you use? I have the don't trip ones in mine but I needed a few layers of teflon tape to stop the play. 

  posted in Share Your Setup / Roast Other Setups

  b

  bastiweber1987666
  12/18/24, 4:57 AM
• Regular Height Bushings in Slalom Trucks

  I just stacked some flat washers on top of each other works well. I like it in my gold rouges, it gives the lean a stop. 

  posted in Trucks / Bushings

  b

  bastiweber1987666
  11/6/24, 10:24 PM
• Freeride wheels on narrow trucks?

  Just give it a go. I think It depends on your trucks. I m struggling to hold out stand ups on my rogues but the zealous trucks work great for freeride.  Your valks should be great for freerid...

  posted in Wheels

  b

  bastiweber1987666
  10/30/24, 4:34 AM
• 3 board quiver

  @Gabriel Fockler Thanks mate, yeah I really like that rocket with the zealous. I rode them stock for a while but wanted a bit more rebound. I ended up with 98/95 Ronin and 78/77 venom/ seismic bush...

  posted in Share Your Setup / Roast Other Setups

  b

  bastiweber1987666
  10/11/24, 10:46 PM
• 3 board quiver

  Yeah very similar, I mainly use the rocket for everything now. The ones with the rogues i use for slalom and commuting because it's very light. The Ronins don't get much use these days. 

  posted in Share Your Setup / Roast Other Setups

  b

  bastiweber1987666
  10/11/24, 2:02 AM
• 3 board quiver

  Left board DIY Deck  140 mm chopped Ronin's  With green krimes Happy Board torque block    Middle board  Rhino racetail  Zealous trucks with a mix of Ronin, se...

  posted in Share Your Setup / Roast Other Setups

  b

  bastiweber1987666
  10/10/24, 7:09 AM
• Ideal freeride wheels?

  A bit late to the party, I'm currently switching between Abec 11 freerides and 88 maverick pros.  The abecs have a nice thaney consistent slide The mavericks have a good edge grip and roll s...

  posted in Wheels

  b

  bastiweber1987666
  10/8/24, 4:57 AM