Blood Orange has been given Halal status
@Jefe W j Jep a 4" grinding disc grinder. It gets a bit messy but worked pretty well. Definitely wear a mask in case you wanna try it.
@Samuel Sparkowich Thanks, i'll give that a try and update the thread in case anyone else is interested in reading about the difference.
@Alex Guerra Double 95a rear allows more lean than stock rear, yes more "turny." However You really won't notice a difference in overall stability at speed regarding micro vibrations or otherwise. ...
@Samuel Sparkowich hell yeah, thank you. I threw double pink up front and still have the stock back. Is double 95a in the back more or less turny than 93/97? Seems it would be similar but mybe the ...
@Alex Guerra DH skating, 74a double pink Venom HPF front, 95a white rear. tighten til there is a small amount of preload (or no unsteadiness when skating) for both ends. This combo also works well ...
Looking to get some 50 degree RF1 plates. Already have a set of 180s on the way with 46 plates but planning to use them on a dancer so looking for 50s.
Anyone know where to source some RF-1s in 2025? Loking for 50 plates and cant seem to find them anywhere.
@Samuel Sparkowich i'm around 150 or 155 lbs
@Alex Guerra Yes. What is your weight?
@Samuel Sparkowich have you played with bushings on the Zealous? I'm trying to improve my tuck leaning. I know a lot of the problem is probably how I am weighting my board, but i'm wondering if I c...
Last year was my first year on Zealous and little trucks in general. I love them but now feeling like I could use a little more turn/dive. I'm a little nervous about wobbles but I've taken the stoc...
Looks fairly good minus the Powells
Latest update: - made a notch on the torque block for locking my foot better for toesides - stacked some belt sander griptape under my front toes for more toeside leverage of the front foot and o...
@Teplitzskate I've been ordering it via Amazon. JOIKIT 2 Pack 12 x 12 Inch UHMW... https://www.amazon.com/dp/B09XL6BZXJ?ref=ppx_pop_mob_ap_share
@Teplitzskate Nice to see someone liking this deck. The Wheelbase is from 20.6inch to 22.5inch. Mine is currently set up at 21.1 inch. I think ill have to move the back pockets a little further fro...
Oh shit dude! Would rip that SK in a heartbeat. Let me know when you're releasing some <3. What's the wheelbase on that?
@Josh McCarthy those look amazing, thank you for the info!
Hi, I recently got into making my own pucks, because I burn through a lot of them at skate events. UHMW Polyethylene is by far the best material and lasts way longer than the HDPE of your basic cut...
Yoo here are my two downhill/freeride setups. Let me know what u think about them. Manta is a brand i´m working on. Trying to build some high quality stuff for the boyyz. First Setup is my S...
its April & so far I'm leaning towards a Make for the year but ,for all I know , it could still Break before it's all over...
Ultra High Molecular Weight Polyethylene (uhmw) is what most of the slide pucks we are using is cut from .
I attempted making homemade pucks when I first started this hobby seriously (2023). I used a half inch thick normal cutting board, and it worked but I quickly realized that these pucks wear down to...
