@Samuel Sparkowich Hey man! Can you make a roman candle tutorial? I can occationally get a decent one, but lack consistency on different pavement types and corner angles. Current set up is t...
@Samuel Sparkowich Hey man! Can you make a roman candle tutorial? I can occationally get a decent one, but lack consistency on different pavement types and corner angles. Current set up is t...
With the new Savants out thought It'd be appropriate to share this little project I did last week. I molded epoxy putty around a Paris pivot cup in my Randal 35* plate. Now I have a perfectly align...
Here's one I did yesterday.
@F Llabata Can confirm that these spherical burrs work great. OP, You want the one with a 5/8 inch ball diameter. The part number is sd-6. They're about $15 on Amazon. I've learned...
@Gabriel Fockler mostly I'm a pusher Live in flat ass Indiana, mostly for exercise and speed matching my 8 yr old on his bicycle. There's a couple small hills to bomb
Not really hill worthy but looks perfectly fine for just riding around. This is for cruising?
As post says, I will have one or both available! New 30 will cost $160. Used 20 $95. If interested I can provide pics of the 20. 30 is on the way.
@Matt Needs Wheels Awesome. My offer stands to all skill levels, and I'm confident you won't get better answer elsewhere.
Just getting back into boarding. 45 dollar quilsilver China junk board Stock form with black 62mm wheels Added 10" paris trucks 75x50mm blank wheels And bullseye abec 9s that...
@Matt Needs Wheels i always thought miurskate beasto were made to a lesser tolerance to make them sound more "skateboardy" .
Posting my top skate video/s of the week Tenerif & Gomera - 2024 this one from VRF. I've never seen these guys before but a great classic feeling edit good vibes all around. W...
The gaspedals on this thing are so damn perfect, I wish stuff like this was made today. Great setup! I bet it slides like heaven.
@ZIP Carvalho that's really cool
Got 10" paris trucks, abec9s and 75x50 mm wheel on order, going for a short wide footprint. Looking for maneuverable, but stable with good speed retention
@Adventures In Skateboarding this guy loves to say powells are bad and then post various old or extremely grippy wheels as alternatives. I would just ignore him. His entire persona is based...
It looks like you stand way too far forward (over the truck), at least for my preference. Your foot seems to be covering all four bolts and most of it is probably in front of the axle. Idk how peop...
Might want to think about better trucks in the future, but that's a sick setup 👌
Ole reliable
2011 Landyachtz Wolfshark Caliber III Snakes The condition isn't the greatest but should be rideable. I'll see how it feels, it might just end up on the wall.
Damn, the deck looks almost brand new, amazing condition for such an old deck. This was my first "real" board, I have some great memories of learning to slide on it. It's so cool to see one ...
I'm 52 years old carving and sliding local hills since 1984 here in Rio de Janeiro. Love this forum.
